Parker Hiross Antares Series Hybrid Air Dryers

Parker Hiross Antares dryers with Tandem Technology are an innovative family of compressed air dryers for volume flows from 150 to 2040 m³/h @ 7 bar g / PDP -40°C. Tandem Technology from Parker Hiross is a further development of the standard hybrid compressed air drying process.

Compact, energy efficient Tandem Technology dryers for compressed air applications in industrial and processing markets. Available for volume flows up to 2040 m³/h @ 7 bar g and dew points between plus 5°C to -70°C.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): ATT 025, ATT 040, ATT 060, ATT 090, ATT 140, ATT 260, ATT 340

Compared to the conventional hybrid compressed air treatment process which is a simple lining-up of a refrigeration and an adsorption dryer, the Tandem Technology goes one step further and fully integrates the two classic drying principles in a compact compressed air treatment package. This unique combination enables high-quality compressed air to be provided to the end-user at low energy consumption levels when compared to more traditional adsorption dryers.

Features of Parker Hiross Antares Series Air Dryers:
• A reduction of energy consumption up to 60% against traditional heatless desiccant dryers. This enables a payback time of less than 24 months. Even higher savings are possible in partial load situations or when the required pressure dew point is above 0°C.
• The pressure dew point is freely adjustable between 5°C and -70°C with no physical changes to the dryer, i.e. like changing an orifice, a nozzle or type of desiccant material in order to reach the desired the dew point.
• Antares series compressed air dryers work with high compressed air inlet temperatures of up to 65°C.
• Very low cost of ownership, especially due to reduced maintenance costs. Compared to standard adsorption dryers, Antares series compressed air dryers need much less desiccant material. Additionally, some Antares models do not even need regular vessel inspections, the downtime therefore is very low.
• Antares helps to keep process safety at a very high level with three integrated high performance filters that are validated according to the demanding ISO12500 standards.
• Antares series compressed air dryers are very compact; their footprint is considerably smaller compared to standard hybrid dryers of a similar performance.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (M³/H) 150 (@ 7 bar(g) / PDP -40°C) to 2040 (@ 7 bar(g) / PDP -40°C)
MAXIMUM FLOW RATE (CFM) 88 (@ 101 psig / PDP -40°F) to 1200 (@ 101 psig / PDP -40°F)
MAXIMUM OPERATING PRESSURE (PSIG) 232, 174
MINIMUM OPERATING PRESSURE (BARG) 2 or 4, depending on model
MAXIMUM AMBIENT TEMPERATURE (C) 50
MINIMUM AMBIENT TEMPERATURE (C) 5
IP RATING 44
MAXIMUM OPERATING TEMPERATURE (C) 65
MAXIMUM OPERATING TEMPERATURE (F) 149
MINIMUM OPERATING TEMPERATURE (C) 5
MINIMUM OPERATING TEMPERATURE (F) 41
CONNECTION TYPE BSP-P
ELECTRICAL REQUIREMENTS 230V, 1-phase, 50Hz, 400V, 3-phase, 50Hz
REFRIGERANT R134a, R407C
DRYER TECHNOLOGY Tandem Technology (advanced Hybrid)
PRESSURE DEW POINT (C) +5 to -70
PRESSURE DEW POINT (F) +41 to -94
BRAND Parker Hiross
PREFILTER TYPE GL Series ZL Grade High Performance Filters
INTERMEDIATE FILTER TYPE GL Series XL Grade High Performance Filters
AFTERFILTER TYPE GL Series ZL Grade High Performance Filters
POWER CONSUMPTION 0.94 kW to 5.17 kW


Antares Dimensions
Dimensions (mm) and weight (kg)
*Scroll to the right to see entire chart on mobile devices.
Model
A (mm)
B (mm)
C (mm)
Weight (kg)
ATT 025 706 1064 1246 180
ATT 040 706 1064 1246 200
ATT 060 806 1214 1416 295
ATT 090 806 1214 1416 335
ATT 140 1007 1586 1345 490
ATT 260 1007 1720 2535 880
ATT 340 1007 1720 2535 950



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...