Parker Hiross BioGas AK Siloxane Removal System

Parker Hiross BioGas AK is a siloxane removal systems to eliminate harmful siloxanes from biogas thereby reducing maintenance costs and improving profitability for greater cost effectiveness.

The ParkerPpTek BioGas AK is an inline regenerative adsorption system that will chemically remove siloxanes from the BioGas, allowing engines to operate deposit free and helping to reduce emissions.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): BGAKC 600, BGAKC 1200, BGAKC 2000, BGAKC 2400, BGAKC 3000, BGAKC 4000, BGAKC 5000

Landfill and sewage gas used in the bioGas to energy industry is becoming increasingly contaminated with Siloxanes. The only permanent solution is to remove them before they reach the engine.

Fitted in the fuel supply line of a bioGas to energy plant BioGas AK decontaminates landfill and sewage gas of siloxanes and other VOC’s. Simple, compact, robust, self contained " regenerative, the system enables extended full-power operation, increased service intervals and payback within an operating period as short as 12 months. The media is hydrophobic repelling water consequently no costly chiller is required to remove moisture.

Depending on the levels of contamination, the change over and regeneration cycle will be programmed to take place every 12 - 24 hours. On a site with average levels of contamination the filter medium will last three years, requiring a minimum of servicing, significantly reducing downtime and the constant removal and disposal of contaminated filter media.

Features of Parker BioGas AK Series Air Dryers:
• Low ongoing maintenance costs
• Media guaranteed for 5 years
• Small outline and footprint
• Stainless steel construction
• Environmentally safe
• Media Hydrophobic
• Skid mounted
• Microprocessor controlled
• Small outline and footprint
• Filter media automatically regenerated
• No engine warranty issues
• No filter medium disposal cost
• Multiple fail safe detection features
• Atex approved compliant (Zone 1or 2)
• Optional Modus TCP/IP connection
• Optional Remote GSM monitoring
• Optional Vent Air Burner (VAB – Mini Flare)
• Installation under pressure or suction


Sizing and Model Selection

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart.

PERFORMANCE CHARACTERISTICS
BRAND Parker
PORT CONNECTION DN150 PN16 or DN200 PN10 Flanges
MAXIMUM FLOW RATE (CFM) Up to 2942
MAXIMUM OPERATING PRESSURE (BAR) 0.4 (400 mbar)
MAXIMUM OPERATING PRESSURE (PSI) 5.8
MAXIMUM TEMPERATURE (C) 40°C
MAXIMUM TEMPERATURE (F) 104
MATERIALS OF CONSTRUCTION Stainless Steel
ELECTRICAL REQUIREMENTS 3 phase 50 Amp / phase
POWER CONSUMPTION Average 20 kW for 120 mins /day
WEIGHT (KG) 1500 - 3500 Kg
WEIGHT (LBS) 1500 - 3500 Kg
HEIGHT 2.6m / 8.5ft
WIDTH 2.5m / 8.2ft
LENGTH 3.5m / 11ft


See the Parker BioGas AK Series Product Brochure for dimensions and weight.




Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...