HDK 50 Series Adsorption Air Dryers

The Parker Zander HDK 50 bar range of high pressure compressed air dryers are designed to dry compressed air and gaseous nitrogen at high pressure levels of up to 50 bar reliably and efficiently down to a pressure dew point of -40°C. HDK series dryers come equipped with integrated Parker Zander pre- and after filtration and are capable of volume flows up to 1180 m³/h.

For applications requiring high pressure compressed air or nitrogen gas up to 50 bar with volume flows of up to 1180m³/h and pressure dew points down to -25/-40°C.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): HDK 18/50, HDK 40/50, HDK 80/50, HDK 120/50, HDK 160/50, HDK 210/50, HDK 360/50, HDK 550/50

Typical applications for HDK 50 series high pressure compressed air dryers are in power stations (i.e. start up of diesel generators) as well as marine applications (i.e. tank ventilation, rope tensioning on off-shore rigs, generator start up etc.).

Features & Benefits of Parker Zander HDK 50 Series Air Dryers:
• Pressure dew point down to -40°C
• Volume flows up to 1180 m³/h @ 50 bar g (725.19 psi g)
• Pre- and after filters installed as standard

Scope of Supply
• Ready to install high pressure adsorption dryer including dew-point control and mounted pre-and after filter
• Optional equipment available mounted ex-works

Available Accessories
• Start-up device
• High pressure differential pressure gauges for the filters

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the product information sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 29.43 @ 362.59 psig / PDP - 104° F to 694.53 @ 362.59 psig / PDP - 104° F
MAXIMUM OPERATING PRESSURE (BARG) 50
MAXIMUM OPERATING PRESSURE (PSIG) 725.19
MINIMUM OPERATING PRESSURE (BARG) 4
MINIMUM OPERATING PRESSURE (PSIG) 58.02
MAXIMUM AMBIENT TEMPERATURE (C) 50
MINIMUM AMBIENT TEMPERATURE (C) 1
IP RATING 65
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 25
MINIMUM OPERATING TEMPERATURE (F) 77
CONNECTION TYPE BSP-P
ELECTRICAL REQUIREMENTS 230V, 50-60Hz, others on request
DRYER TECHNOLOGY High Pressure Adsorption
PRESSURE DEWPOINT (C) - 25°C to - 70°C
PRESSURE DEWPOINT (F) - 13°F to - 97°F
CERTIFICATES PED, others on request
BRAND Parker Zander
PREFILTER TYPE G3/50XP-15G to G12/50XP-25G
AFTERFILTER TYPE G3/50V-15G to G12/50V-25G


FBP HL Dimensions
(Scroll right to see entire chart)
DIMENSIONS HDK 18/50 HDK 40/50 HDK 80/50 HDK 120/50 HDK 160/50 HDK 210/50 HDK 360/50 HDK 550/50
A1 672 685 790 786 815 840 890 945
A2 618 633 720 720 749 773 828 884
B1 1150 1422 1522 1720 1716 1716 1808 1854
B2 460 683 683 683 683 683 683 683
B3 600 600 600 600 600 600 600 600
B4 350 350 350 350 350 350 350 350
C1 402 414 414 412 462 479 509 540
C2 400 400 400 400 400 400 400 400
C3 350 350 350 350 350 350 350 350
C4 50 50 65 65 65 65 65 65
Connection G 1/2" G 1/2" G 1/2" G 1/2" G 3/4" G 3/4" G 3/4" G 3/4"



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...