ecodry KA-MT 35-95 Series Adsorption Air Dryers

The Parker Zander ecodry KA-MT 35-95 range of heatless adsorption dryers with integrated activated carbon stage are designed to dry industrial compressed air reliably and efficiently down to a pressure dew point of -70°C with a remaining oil content of 0.003 mg/m³. The units are compact and are designed to be installed free-standing. KA-MT series compressed air dryers have an integrated activated carbon stage for the removal of oil vapors and GL series pre- and post filtration, they are capable of volume flows up to 940 m³/h in a system operating at 7 barg (100 psig).

Large flow heatless compressed air adsorption dryers with activated carbon stage for all industrial applications requiring volume flows up to 940m³/h and dew points of -25°C to -70°C.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): KA-MT 35, KA-MT 45, KA-MT 60, KA-MT 75, KA-MT 95

Features & Benefits of Parker Zander KA-MT 1-4 Series Air Dryers:
• Pressure dew points down to -70°C
• Volume flows up to 940 m³/h @ 7 barg (100 psig)
• Pre- and post filters installed as standard
• Fully dewpoint dependent control is possible as an option
• Remaining oil content of 0.003 mg/m³
• Highest quality air
• Energy efficient
• Dry air means zero corrosion

Energy Savings
Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available as an option. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides energy savings.

Compressed air can be selectively dried to meet a dew point of -25°C down to -70°C.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 553 @ 101 psig / PDP -40°F
MAXIMUM OPERATING PRESSURE (BARG) 16
MAXIMUM OPERATING PRESSURE (PSIG) 232
MINIMUM OPERATING PRESSURE (BARG) 5
MINIMUM OPERATING PRESSURE (PSIG) 72.5
MAXIMUM AMBIENT TEMPERATURE (C) 50
MINIMUM AMBIENT TEMPERATURE (C) 1.5
IP RATING 65
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 25
MINIMUM OPERATING TEMPERATURE (F) 77
PORT SIZE 1½" to 2½"
CONNECTION TYPE BSP-P DIN ISO 228
ELECTRICAL REQUIREMENTS 230V, 50-60Hz
CONTROLLER TYPE Multitronic
POWER CONSUMPTION 17.2
DRYER TECHNOLOGY Heatless with Activated Carbon Stage
PRESSURE DEWPOINT (C) - 25°C to - 70°C
PRESSURE DEWPOINT (F) - 13°F to - 97°F
CERTIFICATES PED 97/23/EG Module D+B Category II, others on request
BRAND Parker Zander
PREFILTER TYPE GL11XLD to GL14XLD
AFTERFILTER TYPE GL9ZLDH to GL14ZLDH


KA-MT 35-95 Dimensions
Dimensions (mm) and weight (kg)
Model
A
B
C
D
E
Weight
KA-MT 35 1260 1810 585 1320 1320 283
KA-MT 45 1290 1820 605 1320 1320 334
KA-MT 60 1350 1870 635 1320 1320 428
KA-MT 75 1500 2000 635 1515 1515 555
KA-MT 95 1550 2020 670 1515 1515 698



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...