KE-MT 120-600 Series Desiccant Large Flow Compressed Air Dryers

Parker Zander KE-MT Series heatless adsorption dryers are designed to supply high quality dry compressed air reliably and efficiently down to a pressure dew point of -70 °C. They are capable of volume flows of up to 6100m³/h at operating conditions of 7 barg (100psig).

Large flow heatless compressed air dryers with available flow rates up to 6100m³/h @ 7 barg and pressure dew points of -25°C to -70°C, for industrial compressed air treatment applications.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): KE-MT 120, KE-MT 150, KE-MT 200, KE-MT 250, KE-MT 300, KE-MT 380, KE-MT 500, KE-MT 600

The KE-MT Series is offered with energy saving dew point dependent switching (DDS) as an option. Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides significant energy savings.

When there is a further requirement for compressed air to be delivered free from oil vapor and odors, as well as clean and dry, the units can be supplied with an additional third vessel filled with activated carbon, the KEA-MT Series. KEA-MT is ideal for use in laboratory, food, beverage and pharmaceutical applications.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 706 @ 101 psig / PDP -13°F to 3590 @ 101 psig / PDP -13°F
MAXIMUM OPERATING PRESSURE (BARG) 10
MAXIMUM OPERATING PRESSURE (PSIG) 145
MINIMUM OPERATING PRESSURE (BARG) 5
MINIMUM OPERATING PRESSURE (PSIG) 72.52
MAXIMUM AMBIENT TEMPERATURE (C) 50
MINIMUM AMBIENT TEMPERATURE (C) 1.5
IP RATING 54
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 25
MINIMUM OPERATING TEMPERATURE (F) 77
PORT SIZE DN50 to DN125
CONNECTION TYPE Flanged according to EN1092-1
ELECTRICAL REQUIREMENTS 230V, 50-60Hz
CONTROLLER TYPE Multitronic
DRYER TECHNOLOGY Heatless Desiccant
PRESSURE DEWPOINT (C) -25°C to -70°C
PRESSURE DEWPOINT (F) -13°F to -97°F
CERTIFICATES PED 97/23/EG Module D+B Category II, others on request
BRAND Parker Zander
PREFILTER TYPE CF0372CFD to CF1116CFD
AFTERFILTER TYPE CF0372EMD to CF1116EMD


KE-MT 120-600 Dimensions
Dimensions (mm) and weight (kg)
Model
A
B
C
Weight
KE-MT 120 1060 2080 840 640
KE-MT 150 1270 2120 900 830
KE-MT 200 1350 2160 990 955
KE-MT 250 1530 2210 1040 1075
KE-MT 300 1600 2255 1100 1500
KE-MT 380 1875 2385 1200 1990
KE-MT 500 1925 2660 1250 2410
KE-MT 600 2160 2820 1565 2850



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...