PNEUDRI MX Series Desiccant Large Flow Compressed Air Dryers

PNEUDRI MX heatless compressed air dryers provide clean, oil-free and dry compressed air in accordance with all editions of ISO8573-1, the international standard for compressed air quality. They are energy efficient and use a modular construction making them less than half the size of conventional dryers.

Large flow modular compressed air dryers providing pressure dew points of -70°C and -40°C with flow rates up to 2040 m³/hr @ 7 barg, even greater flow rates can be achieved by multi-banking the dryers.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): MX102C, MX103C, MX103, MX104, MX105, MX106, MX107, MX108

At the heart of any compressed air treatment solution is the dryer, its purpose, to remove water vapor, stop condensation, corrosion and in the case of adsorption dryers, inhibit the growth of micro-organisms.

Heatless adsorption dryers (also known as PSA dryers) are the simplest type of adsorption dryer available and have long been the dryer of choice for many industries and applications. They are simple, reliable and cost effective and for small to medium flow systems, often the only viable technology available. Additionally, modular heatless dryers such as PNEUDRI provide even more reliable, smaller, more compact and lightweight dryer which can be installed in both the compressor room or at the point of use.

The PNEUDRI MX’s modular construction allows greater flexibility, it can be multi-banked to provide extra compressed air drying capacity should demand increase. This distinctive feature allows 100% stand by at a fraction of the cost of a traditional twin tower dryer and also allows individual dryers to be easily isolated for routine service work, whilst maintaining the plants clean, dry air supply.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 1200 @ 100 psig
DRYER TECHNOLOGY Heatless Adsorption
PORT CONNECTION (INCH) 2" and 2 ½"
CONNECTION TYPE BSPP or NPT
MAXIMUM OPERATING PRESSURE (BARG) 13
MAXIMUM OPERATING PRESSURE (PSIG) 190
MINIMUM OPERATING PRESSURE (BARG) 4
MINIMUM OPERATING PRESSURE (PSIG) N/A
MAXIMUM AMBIENT TEMPERATURE (C) 55
MAXIMUM AMBIENT TEMPERATURE (F) 131
MINIMUM AMBIENT TEMPERATURE (C) 1
MINIMUM AMBIENT TEMPERATURE (F) 34
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 5
MINIMUM OPERATING TEMPERATURE (F) 41
PRESSURE DEWPOINT (C) -20, -40 and -70 options available
PRESSURE DEWPOINT (F) -4 , -40 and -100 options available
ELECTRICAL REQUIREMENTS 85 - 265 V 1ph 50/60Hz
BRAND Parker Zander
PREFILTER TYPE OIL-X Evolution General Purpose Coalescing and High Efficiency Coalescing Filters
AFTERFILTER TYPE OIL-X Evolution Dust Filter


PNEUDRI MX Dimensions
Dimensions and weight
(Mobile Users: Scroll right to see entire chart)
Dryer Model Height (H) Width (W) Depth (D) Weight
mm in mm in mm in kg lbs
MX102C 1647 64.8 687 27.0 550 21.7 235 518
MX103C 1647 64.8 856 33.7 550 21.7 316 696
MX103 1892 74.5 856 33.7 550 21.7 355 782
MX104 1892 74.5 1025 40.3 550 21.7 450 992
MX105 1892 74.5 1194 47.0 550 21.7 543 1197
MX106 1892 74.5 1363 53.6 550 21.7 637 1404
MX107 1892 74.5 1532 60.3 550 21.7 731 1611
MX108 1892 74.5 1701 67.0 550 21.7 825 1818



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...