PNEUDRI MXLE Large Flow Air Dryer

The PNEUDRI MXLE compressed air dryer has been specifically designed to provide all of the benefits of the PNEUDRI MX heatless adsorption dryer with the additional benefits of lower energy costs and lower environmental impact via its vacuum regeneration method, allowing around 17% more of the generated clean, dry compressed air to be used across the plant.

Large flow low energy modular compressed air dryers providing pressure dew points of -70°C and -40°C with flow rates up to 2040 m³/hr @ 7 barg, even greater flow rates can be achieved by multi-banking the dryers.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): MXLE 102C, MXLE 103C, MXLE 103, MXLE 104, MXLE 105, MXLE 106, MXLE 107, MXLE 108

PNEUDRI MXLE compressed air dryer Includes pre and post OIL-X filters which have been third party tested in accordance with ISO12500-1 / ISO8573-4 resulting in delivered air quality in accordance with ISO8573-1.

The modular construction allows greater flexibility; like PNEUDRI MX, models can be multi-banked to provide extra compressed air drying capacity should demand increase. This distinctive feature allows 100% stand by at a fraction of the cost of a traditional twin tower dryer and also allows individual dryers to be easily isolated for routine service work, whilst maintaining the plants clean, dry air supply. The PNUEDRI MXLE also offers the extra security of a full back up mode, in the unlikely event of a fault occurring with the vacuum pump, the dryer can be operated in full heatless mode to keep the plant operational.

At full load conditions, PNEUDRI MXLE has an average 60% lower energy consumption than a comparative heatless dryer and an average 39% lower energy consumption than a comparative heat regenerative dryer. These energy savings increase in periods of low air demand due to the integrated Energy Saving Technology (EST) which is fitted as standard.

The compressed air dryer is manufactured with materials of construction that meet FDA Title 21 and are EC1935-2004 exempt; meaning the PNEUDRI MXLE compressed air dyer is ideally suited for food, beverage and pharmaceutical industries and applications.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 1200
MAXIMUM OPERATING PRESSURE (BARG) 11
MAXIMUM OPERATING PRESSURE (PSIG) 160
MINIMUM OPERATING PRESSURE (BARG) 5
MINIMUM OPERATING PRESSURE (PSIG) 58
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 5
MINIMUM OPERATING TEMPERATURE (F) 41
PORT CONNECTION (INCH) 2 to 2½
BRAND Parker Zander
PRESSURE DEW POINT (F) -40 or -100 Options
PREFILTER TYPE General Purpose: AOP040HGFX
High Efficiency: AAP040HGFX, General Purpose: AOP045HGFX
High Efficiency: AAP045HGFX, General Purpose: AOP050IGFX
High Efficiency: AAP050IGFX, General Purpose: AOP055IGFX
High Efficiency: AAP055IGFX
AFTERFILTER TYPE Dust: AR040HGMX, Dust: AOP045HGMX, Dust: AOP050IGMX, Dust: AOP055IGMX
DRYER TECHNOLOGY Heatless Vacuum Assisted
ELECTRICAL REQUIREMENTS Available for 360V - 440V 3PH 50Hz or 416V - 506V 3PH 60Hz as standard
PUMP Vac. Pump Part numbers vary between 50Hz and 60Hz models.
PRE-INSTALLED OPTIONAL ACCESSORIES Energy Management System
MATERIALS OF CONSTRUCTION FDA Title 21 Compliant
ISO GRADE -40°C (-40°F) PDP Models - ISO8573-1:2010 Class 2
-70°C (-100°F) PDP Models - ISO8573-1:2010 Class 1


Dimensions and Weight
HEIGHT (MM) Dryer: 1647 to 1892, Pump: 355 to 1185
HEIGHT (INCH) Dryer: 65 to 75 Pump: 14 to 75
WIDTH (MM) Dryer: 794 to 1808 Pump: 900 to 1128
WIDTH (INCH) Dryer: 32 to 71 Pump: 35 to 44
DEPTH (MM) Dryer: 550 Pump: 531 to 585
DEPTH (INCH) Dryer: 22 Pump: 21 to 23
WEIGHT (KG) Dryer: 265 to 855 Pump: 129 to 401
WEIGHT (LBS) Dryer: 583 to 1181 Pump: 284 to 882



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...