Parker Airtek Smart Cycle Plus Series Refrigeration Air Dryers

Smart Cycle Plus Cycling Refrigerated Air Dryers continuously adapt to actual operating conditions and ensure dewpoint control. They boast advanced technical solutions that provide reliability, efficiency and energy savings, making it the ideal solution.

The Smart Cycle Plus configuration combines the advantages of superior performance and energy savings with the oil removal efficiency of a built-in, multi-stage separator/cold coalescer.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): SCP1200, SCP1500, SCP2000, SCP2500, SCP3000

By locating the coalescing filter at the coldest point in the air system, filtration efficiency is greatly enhanced, and because of a pre-separation of bulk contaminants prior to entering the element(s), pressure drop and operating costs are dramatically reduced.

Features of Parker Airtek Smart Cycle Plus Series Air Dryers:
• Best in class dewpoint performance
• Tri Mode Operation allows dryer to operate in cycling, non-cycling or auto mode.
• Unlimited cycling due to unloaded "soft start"
• Multi-stage separation and filtration
• Level actuated drain
• Diagnostic readouts indicate need for service
• Drain light
• Alarm light
• Displays in English or Metric
• Serial Port with MODBUS
• Digital readout air in temperature
• Digital readout ambient or water in temperature
• High inlet temperature warning
• High ambient or water in temperature warning
• Optional Control Center
• Lower dewpoint temperature achieved with Smart Cycle Plus results in cleaner operation
• Longer lasting components
• Upstream malfunction that results in more severe inlet conditions can be readily handled without resulting in downstream problems
• Lower operating costs, with no sacrifice in performance
• Dryer runs only as needed
• Environmentally friendly refrigerant
• Tube and shell heat exchanger with grooved tube sheets provide greatest mechanical strength and lowest pressure drop
• Patented flood level control protects refrigeration circuit


Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
BRAND Parker Airtek
PRE-INSTALLED OPTIONAL ACCESSORIES Air Cooled Unit
CONNECTION TYPE 3" Flg, 4" Flg, 6" Flg
MAXIMUM FLOW RATE (M³/H) 2123.76, 2718.42, 3482.97, 4247.53, 5097.03
RATED INLET PRESSURE (PSI) 100
MAXIMUM OPERATING PRESSURE (PSI) 200, 150
MINIMUM OPERATING PRESSURE (PSI) 50
MAXIMUM OPERATING TEMPERATURE (F) 131
MINIMUM OPERATING TEMPERATURE (F) 41
MAXIMUM AMBIENT TEMPERATURE (F) 115
MINIMUM AMBIENT TEMPERATURE (F) 41
REFRIGERANT R404A
PREFILTER PART NUMBER JL1250-C, JL1600-C, JL2000-C, JL2600-C, JL3000-C
AFTER FILTER PART NUMBER JL1250-F, JL1600-F, JL2000-F, JL2600-F, JL3000-F
PREFILTER REPLACEMENT ELEMENT JE-C1600, JE-C2000, JE-C3000
AFTERFILTER REPLACEMENT ELEMENT JE-F1600, JE-F2000, JE-F3000
INSTALLED CONDENSATE DRAIN Level Actuated
DRYER TECHNOLOGY Compressed Air –Refrigerated
TYPE 1200 – 3000 scfm Cycling Dryers – Air Cooled


Dimensions and weight
*Scroll to the right to see entire chart on mobile devices.

Model
H in (mm)
W in (mm)
D in (mm)
Weight lbs (kg)
SCP1200 65 (1651) 74 (1880) 41 (1041) 1850 (839)
SCP1500 72 (1829) 78 (1981) 48 (1219) 2200 (998)
SCP2000 76 (1930) 102 (2591) 54 (1372) 3000 (1361)
SCP2500 76 (1930) 102 (2591) 54 (1372) 3370 (1529)
SCP3000 85 (2159) 108 (2743) 66 (1676) 4015 (1821)



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...