WVM Series Regenerative Desiccant Air Dryers

Parker Zander WVM compressed air dryers provide an energy efficient heat regenerated compressed air drying solution for large scale compressed air applications. Ideal for electronics and automotive production plants but suitable for all general manufacturing industries where typically high volume flows and low pressure dew points are required.

For large flow industrial compressed air applications providing volume flows of up to 14500m³/h and pressure dew points down to -70°C, with energy savings of up to 25%.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): WVM 40, WVM 50, WVM 65, WVM 85, WVM 120, WVM 150, WVM 200, WVM 235, WVM 300, WVM 355, WVM 410, WVM 475, WVM 525, WVM 620, WVM 710, WVM 800, WVM 920, WVM 1080, WVM 1230, WVM 1450

Providing energy savings of up to 25% compared to conventional systems, WVM series compressed air dryers can be equipped with heat exchangers that allow steam or other available process heat sources to be used for heat regeneration. This alternative regeneration process can be employed in addition to or instead of the standard electrical heaters, resulting in even higher energy savings.

WVM series compressed air dryers combine highest quality and reliability with the added peace of mind of being covered by an extended warranty scheme*, as well as being backed by a variety of global approvals.

Features & Benefits of Parker Zander WVM Series Air Dryers:
• Two layered desiccant bed • Active heating under vacuum
• Intensive cooling
• Pressure build-up on the wet side
• Dew point control as standard
• Changeover without dewpoint peak
• Reliable dewpoint down to -70°C
• Function alarm
• Various options for optimal adaptability to customer needs
• Low energy costs
• No air loss
• Regeneration without purge air
• Low regeneration temperature

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 247 (@ 101 psig / PDP -13°F) to 8534 (@ 101 psig / PDP -13°F)
MAXIMUM OPERATING PRESSURE (BARG) 10
MAXIMUM OPERATING PRESSURE (PSIG) 145
MINIMUM OPERATING PRESSURE (BARG) 4
MINIMUM OPERATING PRESSURE (PSIG) N/A
MAXIMUM AMBIENT TEMPERATURE (C) 40 °C for intake air for regeneration; otherwise 50 °C
MINIMUM AMBIENT TEMPERATURE (C) 1.5 (insulation required if temperature is below 15°C)
IP RATING 54
MAXIMUM OPERATING TEMPERATURE (C) 40
MAXIMUM OPERATING TEMPERATURE (F) 104
MINIMUM OPERATING TEMPERATURE (C) 20
MINIMUM OPERATING TEMPERATURE (F) 68
PORT SIZE DN40 to DN250, depending on model
CONNECTION TYPE Flange acc. to EN 1092-1
ELECTRICAL REQUIREMENTS 400V, 50Hz
CONTROLLER TYPE ZDMC2 with Touch Panel
POWER CONSUMPTION 3 kW to 98 kW, depending on model
DRYER TECHNOLOGY Vacuum Heat Regeneration with Zero Purge
PRESSURE DEWPOINT (C) - 25°C to - 70°C
PRESSURE DEWPOINT (F) - 13°F to - 94°F
BRAND Parker Zander
COMMUNICATION INTERFACE Modbus RS485, Ethernet RJ45, Profibus Slave (Option)
CERTIFICATES PED, other certificates or approvals on request


WVM Dimensions
Dimensions (mm) and weight (kg) (Scroll right on mobile to see entire chart)
Model
A
B
C
Weight
WVM 40 1140 2230 990 570
WVM 50 1140 2230 990 600
WVM 65 1260 2300 1110 770
WVM 85 1260 2300 1110 800
WVM 120 1460 2690 1160 1150
WVM 150 1540 2700 1200 1300
WVM 200 1605 2750 1405 1650
WVM 235 2025 2870 1490 2000
WVM 300 2050 2890 1565 2250
WVM 355 2160 2960 1750 2650
WVM 410 2430 3230 1710 3250
WVM 475 2490 3260 1710 3650
WVM 525 2550 3265 1775 4050
WVM 620 2570 3540 1865 4700
WVM 710 2635 3560 1900 5050
WVM 800 3085 3625 2110 6450
WVM 920 3125 3645 2235 7500
WVM 1080 3225 3710 2285 8700
WVM 1230 3475 4050 2350 11500
WVM 1450 3500 4200 2380 13500



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...