Parker Zander AK 120-600 Series
Activated Carbon Adsorbers

The Parker Zander AK 120-600 range of activated carbon adsorbers are designed to purify pre-dried industrial compressed air down to a remaining oil content of 0.003mg/m³.

The units can be installed free-standing or on a frame. They come equipped with oil indicator and pressure gauge and are capable of volume flows up to 6100 m³/h in a system operating at 7 barg (100 psig). Matching pre- and after-filters have to be ordered separately.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): AK 120, AK 150, AK 200, AK 250, AK 300, AK 380, AK 500, AK 600

Features & Benefits of Parker Zander AK 120-600 Activated Carbon Adsorbers:
• Protects tools and downstream equipment
• Increases efficiency, reduces downtimes
• Significantly reduces maintenance costs
• Full range of models and filtration grades for all industrial applications

Operation
Pre-dried compressed air flows from top to bottom through a single vessel containing activated carbon. Any remaining oil aerosols and oil vapors including odors and tastes are removed by the active surface area of the highly porous activated carbon to produce high quality, clean compressed air. Using an oil-indicator tube, quality checks can be carried out periodically.

Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, Activated Carbon Adsorbers must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

Please note: The lifetime of the activated carbon filling can vary and is dependent on the contamination type and quantity and also on the humidity of the compressed air.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 706.30 @ 7 bar(g) to 3590.35 @ 7 bar(g)
MAXIMUM OPERATING PRESSURE (BARG) 10
MAXIMUM OPERATING PRESSURE (PSIG) 145.04
MINIMUM OPERATING PRESSURE (BARG) 5
MINIMUM OPERATING PRESSURE (PSIG) 72.52
MAXIMUM AMBIENT TEMPERATURE (C) 50
MAXIMUM AMBIENT TEMPERATURE (F) 122
MINIMUM AMBIENT TEMPERATURE (C) 1.5
MINIMUM AMBIENT TEMPERATURE (F) 34.7
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 25
MINIMUM OPERATING TEMPERATURE (F) 77
CONNECTION TYPE Flanged
HEIGHT (MM) 2070 to 2820
WIDTH (MM) 500 to 960
DEPTH (MM) 840 to 1150
WEIGHT (KG) 235 to 950
DRYER TECHNOLOGY Activated Carbon Adsorber
CERTIFICATES PED, others on request
MATERIALS OF CONSTRUCTION Vessel & Piping: Steel, Seals: NBR
BRAND Parker Zander


AK 120-600 Dimensions
Dimensions (mm) and Weight (kg)
*Scroll to the right to see entire chart on mobile.
Model
A (mm)
B (mm)
C (mm)
Weight (kg)
AK 120 500 2070 840 235
AK 150 500 2110 900 275
AK 200 650 2150 990 340
AK 250 650 2210 1040 385
AK 300 650 2230 1100 440
AK 380 850 2340 1200 520
AK 500 850 2640 1250 650
AK 600 950 2800 1150 950



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...