Parker Domnick Hunter GH 100
Series Compressed Air Filters

Parker domnick hunter GH 100 series high pressure filters are designed to be ideal for high pressure applications up to 100 bar g. The innovative construction features of the filter housing provide a reliable assembly, as well as simple and safe handling for replacing the filter element.

One essential construction feature is the double O-ring seal which protects the housing thread against pollution and humidity and therefore prevents the thread from corrosion. Additionally the second O-ring prevents the filter housing parts from over winding.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): GH3/100, GH5/100, GH7/100, GH9/100, GH11/100, GH12/100, GH13/100

High pressure filters for compressed air applications up to 100 bar g with optimized flow rates and improved housing design for high energy efficiency, maximum reliability and safe operation.

Highly effective pleated media in four different grades provide an element surface that is four times the size, compared to the conventional wrapped design. The result is a reduced flow speed and efficient separation simultaneously with low pressure drop, thus providing cost reduction during operation with reliable separation performance.

By fastening the filter element via its base thread screwed on the tie-rod, this provides the greatest operating safety, even under the pressure pulsations in intermittent operation that are common for high pressure applications.

Features & Benefits of Parker Domnick Hunter GH 100 Series Compressed Air Filters:
• Optimised flow rates and compact filter housing.
• Improved housing design with double O-ring sealing.
• Threaded rod element fixing.
• Pleated elements.
• Complete filter including filter element and manual drain.
• As an option filters are also available without a drain.
• All filter sizes offer connectors for the installation of calibrated differential pressure gauges.

Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
RESIDUAL OIL CONTENT 0.01 mg/m³ @ 20 °C (XP), 0.5 mg/m³ @ 20 °C (ZP), n.a. (V), 0.003 mg/m³ @ 20 °C (A)
FILTRATION EFFICIENCY 99.99% to 99.99999%, depending on filter type
ELEMENT CHANGE INTERVAL 12 months for V, ZP, XP elements / 3 months or max. 1500 hours of operation for A elements
MAXIMUM FLOW RATE (M³/H) 188 @ 100 bar(g) to 2787 @ 100 bar(g)
MAXIMUM FLOW RATE (CFM) 111 @ 1450 psig to 1640 @ 1450 psig
MAXIMUM OPERATING PRESSURE (BARG) 100
MAXIMUM OPERATING PRESSURE (PSIG) 1450
MAXIMUM OPERATING TEMPERATURE (F) 176 or 104, depending on filter type
MINIMUM OPERATING TEMPERATURE (C) 1.5
MINIMUM OPERATING TEMPERATURE (F) 34.7
WEIGHT (KG) 2.8, 3.4, 18.2, 21.9, 28.3, 39.2
WEIGHT (LBS) 6.17, 7.49, 40.12, 48.28, 62.39, 86.42
HEIGHT (MM) 355, 232, 420, 297, 455, 332, 540, 417, 655, 532, 910, 787
HEIGHT (INCH) 13.97, 9.13, 16.53, 11.69, 17.91, 13.07, 21.26, 16.42, 25.78, 20.94, 35.82, 30.98
WIDTH (MM) 80, 116, 125
WIDTH (INCH) 3.15, 4.56, 4.92
CONNECTION TYPE BSP-P (DIN ISO 228)
MICRON RATING 0.01, 1, 3, n.a., depending on filter type
DRAIN PORT SIZE G1/4i
PRE-TREATMENT REQUIREMENT depending on filter type
CERTIFICATES PED Fluid Group II, TR
APPLICATION TYPE Filtration of compressed air and gaseous Nitrogen
BRAND Parker Domnick Hunter


GH 100 Dimensions
Dimensions in (mm) and weight lbs (kg)
*Scroll to the right to see entire chart on mobile.
Model
A (mm)
B (mm)
C (mm)
D (mm)
Weight lbs (kg)
GH3/100 80 355 25 100 2.8
GH5/100 80 355 25 115 2.8
GH7/100 80 420 25 185 3.4
GH9/100 116 455 25 170 18.2
GH11/100 116 540 25 270 21.9
GH12/100 125 655 33 365 28.3
GH13/100 125 910 33 560 39.2



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...