Parker Domnick Hunter OIL-X ACS
Series Compressed Air Filters

OIL-X Grade ACS point of use oil vapor removal filters are used for smaller flow rate applications and applications where more frequent element changes can be tolerated.

Activated carbon filters for the removal of oil vapor and hydrocarbon odors, providing a maximum remaining oil content of <0.003mg/m³ (<0.003ppm) @ 21°C (70°F).

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): ACS 010A, ACS 010B, ACS 010C, ACS 015C, ACS 020C, ACS 020D, ACS 025D, ACS 025E, ACS 030G, ACS 035G, ACS 040H, ACS 045I, ACS 050I, ACS 055I, ACS 055J, ACS 060K

Oil vapor is oil in a gaseous form and will pass straight through coalescing filters which are designed to remove liquid oil and oil aerosols, Parker domnick hunter recommend activated carbon adsorption filter technology for the removal of oil vapor.

Features & Benefits of Parker Domnick Hunter OIL-X Series Compressed Air Filters:
• High efficiency 'point of use' filters
• Protects downstream equipment and processes
• Provides high quality, clean, oil free compressed air to international standards
• Reduced cost of ownership
• Enhanced health and safety
• Suitable for all types of air compressor and compatible with all compressor lubricants
• Manufactured in accordance with ISO9001
• Tested in accordance with the requirements of ISO8573-5

Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
FILTER TYPE Oil vapor Removal
RESIDUAL OIL CONTENT '0.003 mg/m³ - 0.003 ppm(w) @ 21°C (70°F)
MAXIMUM FLOW RATE (M³/H) 22 to 31248 @7 barg
MAXIMUM OPERATING PRESSURE (BARG) 16 and 20
MAXIMUM OPERATING PRESSURE (PSIG) 232 and 290
MINIMUM OPERATING PRESSURE (BARG) 1
MINIMUM OPERATING PRESSURE (PSIG) 15
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 2
MINIMUM OPERATING TEMPERATURE (F) 35
WEIGHT (KG) 00.8 to 580
WEIGHT (LBS) 1.1 to 7.6
HEIGHT (MM) 154 to 733
HEIGHT (INCH) 6.1 to 28.9
WIDTH (MM) 76 to 129
WIDTH (INCH) 3 to 5.1
DEPTH (MM) 64 to 115
DEPTH (INCH) 2.5 to 4.5
REPLACEMENT ELEMENT Grade PACS. Codes dependent on filter size.
BRAND Parker Domnick Hunter


OIL-X Dimensions
Dimensions in (mm) and weight lbs (kg)
*Scroll to the right to see entire chart on mobile.
Model
Height in (mm)
Width in (mm)
Depth in (mm)
Weight lbs (kg)
ACS 010A 7.09 (180) 2.99 (76) 2.56 (65) 1.86 (0.84)
ACS 010B 7.09 (180) 2.99 (76) 2.56 (65) 1.84 (0.84)
ACS 010C 7.09 (180) 2.99 (76) 2.56 (65) 1.81 (0.82)
ACS 015C 9.37 (238) 3.5 (89) 3.31 (84) 2.55 (1.16)
ACS 020C 9.37 (238) 3.5 (89) 3.31 (84) 2.58 (1.17)
ACS 020D 9.37 (238) 3.5 (89) 3.31 (84) 3.19 (1.44)
ACS 025D 10.9 (277) 4.72 (120) 4.53 (115) 4.71 (2.14)
ACS 025E 10.9 (277) 4.72 (120) 4.53 (115) 5.92 (2.69)
ACS 030G 14.45 (367) 4.72 (120) 4.53 (115) 6.70 (3.04)
ACS 035G 17.3 (440) 6.46 (164) 6.18 (157) 15.21 (6.90)
ACS 040H 20.9 (532) 6.46 (164) 6.18 (157) 16.09 (7.30)
ACS 045I 20.9 (532) 6.46 (164) 6.18 (157) 15.65 (7.10)
ACS 050I 25.7 (654) 7.56 (192) 7.20 (183) 22.71 (10.30)
ACS 055I 33.2 (844) 7.56 (192) 7.20 (183) 33.05 (14.99)
ACS 055J 33.2 (844) 7.56 (192) 7.20 (183) 33.73 (15.30)
ACS 060K 33.3 (847) 16.54 (420) 11.10 (282) 98.11 (44.50)



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...