Parker Domnick Hunter OIL-Xplus
Stainless Steel Compressed Air Filters

The Parker Domnick Hunter OIL-Xplus Stainless Steel compressed air filters are specially designed to provide high efficiency filtration in areas where atmospheric conditions could cause problematic corrosion of filter housing.

With the installation of OIL-X stainless steel compressed air filters, compressed air can be delivered in accordance with all editions of ISO8573-1, offering a high quality, robust and cost effective solution.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Compressed air systems are often located where the environment and prevailing atmospheric conditions are particularly corrosive. These applications include chemical and petro-chemical installations, offshore drilling platforms and ships, marine and process industries where problems concerning corrosion are increased.

Manufactured from 316L stainless steel for operating pressures up to 16 barg (232 psig), OIL-Xplus stainless steel compressed air filters are ideal for the highly efficient filtration of compressed air where a compressed air system is installed in a corrosive environment.

Features & Benefits of Parker Domnick Hunter OIL-Xplus Stainless Steel Series Compressed Air Filters:
• Suitable for all compressed air applications and all compressor types
• Coalescing and dust removal filters are covered by one year compressed air quality guarantee which is automatically renewed with annual maintenance
• Filter housings are covered by a 10 year guarantee
• Low lifetime costs
• Delivered air quality in accordance with all editions of ISO8573-1, the international standard for compressed air quality
• Helps reduce the release of CO2 into the environment

Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 911 @ 100 psig
CONNECTION TYPE BSPP
FILTRATION EFFICIENCY 99.925%, to 99.9999% or ISO8573-5
MAXIMUM OPERATING PRESSURE (BARG) 16
MAXIMUM OPERATING PRESSURE (PSIG) 232
MAXIMUM OPERATING TEMPERATURE (C) 30 to 66
MAXIMUM OPERATING TEMPERATURE (F) 86 to 150
MINIMUM OPERATING TEMPERATURE (C) 1.5
MINIMUM OPERATING TEMPERATURE (F) 35
DIFFERENTIAL PRESSURE (MBAR) Dry: 70 to 100
Wet: 140 to 200
DIFFERENTIAL PRESSURE (PSI) Dry: 1 to 1.5
Wet: 2 to 3
RESIDUAL OIL CONTENT 0.01mg/3 0.01 ppm(w) @ 21C (70F), 0.01 mg/m3 0.5 ppm(w) @ 21C (70F),
n/a, 0.003mg/m3 0.003 ppm(w) @ 21C (70F)
ELEMENT CHANGE INTERVAL 12 months or when odors can be detected (1000 hours)
REPLACEMENT ELEMENT K009AA, K017AA, K030AA, K058AA, K145AA, K220AA, K330AA,
K430AA, K009AO, K017AO, K030AO, K058AO, K145AO, K220AO, K330AO,
K430AO, K009AR, K017AR, K030AR, K058AR, K145AR, K220AR, K330AR,
K430AR, K009ACS, K017ACS, K030ACS, K058ACS, K145ACS, K220ACS, K330ACS
HEIGHT (MM) 210 to 698
HEIGHT (INCH) 8.3 to 27.5
WIDTH (MM) 145 to 300
WIDTH (INCH) 5.7 to 11.8
DEPTH (MM) 112 to 210
DEPTH (INCH) 4.4 to 8.3
WEIGHT (KG) 2.5 to 12
WEIGHT (LBS) 5.5 to 26.4
BRAND Parker Domnick Hunter


OIL-Xplus Stainless Steel Dimensions
Dimensions in (mm) and weight lbs (kg)
Filter Grade Types: AO, AA, AR, ACS

*Scroll to the right to see entire chart on mobile.
Model
Height in (mm)
Width in (mm)
Depth in (mm)
Weight lbs (kg)
(grade) 0009GSS 8.3 (210) 5.7 (145) 4.4 (112) 5.5 (2.5)
(grade) 0017GSS 9.3 (236) 5.7 (145) 4.4 (112) 5.5 (2.5)
(grade) 0030GSS 10.6 (270) 6.1 (154) 4.4 (112) 5.5 (2.5)
(grade) 0058GSS 15.0 (382) 7.5 (190) 5.8 (148) 9.9 (4.5)
(grade) 0080GSS 19.9 (506) 7.9 (200) 5.8 (148) 11.0 (5.0)
(grade) 0145GSS 19.9 (506) 8.9 (225) 5.8 (148) 11.0 (5.0)
(grade) 0220GSS 24.7 (628) 11.0 (280) 8.3 (210) 26.4 (10.0)
(grade) 0330GSS 36.9 (938) 11.0 (280) 8.3 (210) 26.4 (10.0)
(grade) 0405GSS 27.5 (698) 11.4 (290) 8.3 (210) 26.4 (10.0)
(grade) 0430GSS 27.5 (698) 11.8 (300) 8.3 (210) 26.4 (10.0)



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...