Parker Domnick Hunter OIL-X IP50
Series Compressed Air Filters

Parker Domnick Hunter OIL-X IP50 compressed air filters for applications requiring operating pressures up to 50 bar g (725 psig). OIL-X IP50 are Ideally suited for food, beverage, pharmaceutical, P.E.T applications.

Parker domnick hunter OIL-X IP50 intermediate pressure filters combine the new energy efficient OIL-Xplus filter elements with specially designed housings to provide high efficiency filtration.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): IP50 010A, IP50 020B, IP50 030C, IP50 040D, IP50 050E, IP50 060G, IP50 070H

Available in various filtration grades and connection sizes, they provide a level of protection tailored to your application. Typical Applications: P.E.T. bottling, air blast circuit breakers, shipborne air distribution systems, engine starting and pressure testing of pipelines.

Features & Benefits of Parker Domnick Hunter OIL-X IP50 Series Compressed Air Filters:
• Coalescing filters fully tested in accordance with ISO12500-1.
• Performance independently validated by Lloyds Register.
• Elimination of oil, water and dirt - Available in six filtration grades.
• 10 years guarantee on filter housing.
• Ease of installation - Compact housing design.
• Port options - BSPP / NPT - Weld Flange kits also available.
• Meets or exceeds the requirements for delivered air quality shown in all editions of ISO8573-1, the international standard for compressed air quality.
• Ideally suited for Food / Beverage / Pharmaceutical / P.E.T. applications: FDA Title 21 compliance and EC1935 - 2004 Exempt.
• Trouble free, high performance - quality OIL-Xplus element backed with a 1 year performance guarantee.

Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
FILTRATION EFFICIENCY 99.9999%, 99.925%, >90%, ISO8573-5
ELEMENT CHANGE INTERVAL 12 months, n/a, When odors can be detected (1000 hours)
RESIDUAL OIL CONTENT 0.01 mg/m3 0.01 ppm(w) @ 21C (70F), n/a, 0.003 mg/m3 0.003 ppm(w) @ 21C (70F)
MAXIMUM FLOW RATE (M³/H) 108 - 3473
MAXIMUM FLOW RATE (CFM) 64 - 2044
MAXIMUM OPERATING PRESSURE (BARG) 50
MAXIMUM OPERATING PRESSURE (PSIG) 725
MAXIMUM OPERATING TEMPERATURE (C) 100, 30
MAXIMUM OPERATING TEMPERATURE (F) 212, 86
MINIMUM OPERATING TEMPERATURE (C) 2
MINIMUM OPERATING TEMPERATURE (F) 35
DIFFERENTIAL PRESSURE (MBAR) Dry: 140
Wet: 200, Dry: 70
Wet: 140, 'Dry: 70, Dry: 100, Wet: 70
DIFFERENTIAL PRESSURE (PSI) Dry: 1.5
Wet: 3.0, Dry: 1.0
Wet: 2.0, Dry: 1.0, Dry: 1.5, Wet: 1.0
REPLACEMENT ELEMENT K009AA, K030AA, K145AA, K220AA, K009AO, K030AO, K145AO, K220AO,
K009AR, K030AR, K145AR, K220AR, K009ARR, K030ARR, K145ARR, K220ARR,
n/a, K009ACS, K030ACS, K145ACS, K220ACS
HEIGHT (MM) 175 - 480
HEIGHT (INCH) 6.9 - 18.9
WIDTH (MM) 78 - 170
WIDTH (INCH) 3.1 - 6.7
DEPTH (MM) 68 - 162
DEPTH (INCH) 2.7 - 6.4
WEIGHT (KG) 1.3 - 10.0
WEIGHT (LBS) 2.9 - 22.0
BRAND Parker Domnick Hunter


OIL-X IP50 Dimensions
Dimensions ins (mm) and weight lbs (kg)
*Scroll to the right to see entire chart on mobile.
Model
Height ins (mm)
Width ins (mm)
Depth ins (mm)
Weight lbs (kg)
IP50 010A 6.9 (175) 3.1 (78) 2.7 (68) 2.9 (1.3)
IP50 020B 6.9 (175) 3.1 (78) 2.7 (68) 2.9 (1.3)
IP50 030C 9.6 (245) 3.5 (89) 3.3 (84) 4.4 (2.0)
IP50 040D 9.6 (245) 3.5 (89) 3.3 (84) 4.4 (2.0)
IP50 050E 16.6 (423) 4.8 (122) 4.6 (116) 11.0 (5.0)
IP50 060G 16.6 (423) 4.8 (122) 4.6 (116) 11.0 (5.0)
IP50 070H 18.9 (480) 6.7 (170) 6.4 (162) 22.0 (10.0)



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...