Parker Regenerative Desiccant Air Dryers

Parker's complete line of Regenerative Desiccant Air Dryers available through mdi.
Parker Desiccant Air Dryers reduce the atmospheric dewpoint of compressed air without operator attention. Featuring coalescing prefilters with automatic drains, our desicant air dryers provide a particulate final filter, a moisture indicator, differential pressure indicator and pretested controls.

For large flow industrial compressed air applications providing volume flows of up to 14500m³/h and pressure dew points down to -70°C, with energy savings of up to 25%.
These dryers typically provide pressure dew points of -40°F (-40°C) down to -100°F (-73°C) pressure dew point (pdp).
The DAS is the reliable, cost effective and flexible way to provide clean dry air exactly where needed.
Parker Airtek TWP Series Externally Heated Desiccant Air Dryers use heat and the adsorption method to remove moisture from compressed air. Pressure dewpoint of -40°F (-40°C) and flowrate of 200 – 7500 scfm depending on model.
Parker Airtek TWB Series Externally Heated Blower Purge Desiccant Air Dryers use heat and the adsorption method to remove moisture from compressed air. Pressure dewpoint of -40°F (-40°C) and flowrate of 200 – 7500 scfm depending on model.
Full stream HOC low energy compressed air dryers that utilise excess heat from oil-free compressors for regeneration, providing volume flows of up to 14500 m³/h @ 7 bar g.
Partial stream HOC low energy compressed air dryers that utilise excess heat from oil-free compressors for regeneration, providing volume flows of up to 14500 m³/h @ 7 bar g.



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...