Parker Hiross Hyperchill Plus BioEnergy Water Chillers

Parker Hiross Hyperchill Plus BioEnergy Water Chillers are specifically designed for biogas applications to ensure an accurate control of cooling water temperature.

Biogas is primarily composed of methane and carbon dioxide with smaller amounts of hydrogen sulphide and ammonia. Trace amounts of other gases like hydrogen, nitrogen or carbon monoxide are also present in the biogas. Usually the mixed gas is saturated with water-vapor and may contain dirt particles. For biogas as a fuel, most of the impurities have to be removed, as they can cause contamination, deposits and damage to equipment. In particular, biogas needs to be dried by cooling it to temperatures close to 5°C, using water-cooled heat exchangers fed by water chillers. Hyperchill Bioenergy is a key component in this biogas treatment process.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): ICEP 007-BIO, ICEP 010-BIO, ICEP 014-BIO, ICEP 020-BIO, ICEP 024-BIO

Extremely compact and easy to use, Hyperchill Bioenergy ensures an accurate control of the water temperature. It has been specifically designed for Biogas applications and provides safe and reliable operation in the harshest of environments, typically found in anaerobic digesters and landfill biogas production areas.

Features and benefits of Parker Hiross Hyperchill Plus:
• Special protective treatment of condensers and copper piping
• Pump and tank installed inside the chiller
• Large built-in water tank that provides a large thermal mass / storage capacity thus reducing the number of refrigerant compressor stop/starts and short cycling and thereby increasing the compressor and chiller lifetime
• Designed to provide cooling water where low temperature water is required as standard
• Use of compliant scroll compressors designed specifically for high efficiency and long life in industrial applications
• Low ambient speed-control on fan-motor ensures constant performances at different temperatures, long lifetime of the fans and a reduction in absorbed power when ambient temperature is low
• Maximum working ambient temperature up to 48°C for ICEP models, up to 45°C for ICE models
• Compact and easy to install solution
• Reliable operation in the most aggressive of ambient atmospheres at biogas plants and landfill sites
• High working limits and low running costs

For more information or a detailed discussion about your specific requirements please contact us at 727-847-4900 or Toll Free at 800-761-4298.


*Scroll to the right to see entire chart on mobile.

PERFORMANCE CHARACTERISTICS
MAXIMUM COOLING CAPACITY (KW/°C) 6.8 to 20.9
PORT CONNECTION (INCH) 3/4 to 1
CONNECTION TYPE BSP-P
MAXIMUM AMBIENT TEMPERATURE (C) 48
MAXIMUM AMBIENT TEMPERATURE (F) 118.4
MINIMUM AMBIENT TEMPERATURE (C) 5 to 10
MINIMUM AMBIENT TEMPERATURE (F) 41 to 50
REFRIGERANT R407C
ELECTRICAL REQUIREMENTS 400V/3ph/50Hz
NUMBER OF AXIAL FANS 1 to 2
COMPRESSOR Hermetic Scroll
MAXIMUM OPERATING TEMPERATURE (C) 30
MAXIMUM OPERATING TEMPERATURE (F) 86
MINIMUM OPERATING TEMPERATURE (C) 5
MINIMUM OPERATING TEMPERATURE (F) 41
IP RATING 54
APPLICATION TYPE Biogas Treatment
WEIGHT (KG) 160 to 230
WEIGHT (LBS) 353 to 507
WIDTH (MM) 756
WIDTH (INCH) 29.7
DEPTH (MM) 806 to 1206
DEPTH (INCH) 31.7 to 47.5
HEIGHT (MM) 1405
HEIGHT (INCH) 55.3
CERTIFICATES PED 97/23/EC, Machinery Directive 2006/42/EC, Electromagnetic Directive 2004/108/EC
NOISE LEVEL (DB(A)) 50 to 53
BRAND Parker Hiross
TYPE Pressurized closed hydraulic circuit


Dimensions (mm) and weight (kg)
*Scroll to the right to see entire chart on mobile.

Model
Height mm
Width mm
Depth mm
Weight kg
ICEP 007-BIO 1405 806 756 N/A
ICEP 010-BIO 1405 806 756 N/A
ICEP 014-BIO 1405 806 756 140
ICEP 020-BIO 1405 1206 756 175
ICEP 024-BIO 1405 1206 756 185



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...